Filter
Top Products
ENGLISH AUDIO DUBBING
53
53
3 Press the
MMEENNUU
button.The on-screen menu
appears
4 Use
==PP--
or
;;PP++
to select the option
RECORDING FUNCTIONS and confirm
with
PP
5
Use
==PP--
or
;;PP++
to select the option
AUDIO DUBBING and confirm with
PP
0 On the connected sound source start the
playback of the sound signal and press
ssiimmuullttaanneeoouussllyy
the Record button n on the
remote control of the video recorder to start
the recording.
B Finish with the
MMEENNUU
button
6 The video recorder switches to still picture
7 Wind to the space on the tape, where the
dubbing should end
, and with the button
CCLLEEAARR ((CCLL))
set the counter to 00:00:00
8 Wind to the space on the tape, where the
dubbing should begin
, and press
RR
.The video
recorder switches to still picture
9 Press R (still picture) several times until the
desired point is reached and confirm with the
Stop button h
A The new sound signal is being recorded. As
soon as the tape position previously marked
with 00:00:00 is reached, the dubbing will
stop automatically
PPRROOBBLLEEMM
88 TThhee ttaappee ssttooppss aauuttoommaattiiccaallllyy aanndd tthhee
RREECCOORRDDIINNGG FFUUNNCCTTIIOONNSS ssccrreeeenn aappppeeaarrss
44
The end of the tape was reached during winding
or playback. Go back to step 5, to start this
procedure again.
MMaakkee dduubbbbiinngg aauuddiibbllee
To make dubbing audible, you must select the MIX or
MONO sound channel setting (see Selecting the sound
channel).
MAIN MENU
RECORDING FUNCTIONS
ÂÅ RECORD SETTINGS Å
AUDIO ONLY
AUDIO DUBBING
TO EXIT
PRESS MENU
É
TTIIPP