Filter
Top Products
ENGLISH DELETE/CHECK/CHANGE RECORDINGS /NEXTVIEW
47
47
DDeelleettee // cchheecckk // cchhaannggee pprrooggrraammmmeedd rreeccoorrddiinnggss
4
DDeelleettee::
Press
CCLLEEAARR ((CCLL)),,
confirm with
the button
OOKK
(screen shows
TIMER CLEARED) and finish
with
TTIIMMEERR kk
CChheecckk::
Press P, check the stored
details and (once you have
checked) end with
TTIIMMEERR kk
CChhaannggiinngg::
Press
PP
, use
==PP--
or
;;PP++
to
select the entry fields to be alte-
red and use
00--99
to enter the new
value(s). Confirm with
OOKK
and
activate the timer again with the
Standby button
mm
.
1 Press the
TTIIMMEERR
button
kk
on the remote
control
3 In the display, use the button
==PP--
or
;;PP++
to
select the storage position you wish to
check/change/delete
WWhhaatt iiss aa mmeemmoorryy llooccaattiioonn??
For technical reasons, your video recorder has access
to a limited number of drawers in which you can
store your programming requirements. Drawers
occupied by programme recording details are only
available for use again after the video recorder has
successfully completed a programmed recording or if
it has been manually deleted.Your video recorder can
store up to six timer programmings
PP
AARRDDOONN
??
TIMER
TIMER LIST
VPS
DATE PROG. START PDC END
21 01 20:00 * 21:30 SP
TOTAL RECORD TIME: 01:30
TO CHANGE TO EXIT
PRESS P PRESS TIMER
UUssiinngg NNeexxTTVViieeww LLiinnkk
If your TV set supports the function NexTView Link there is
another way in which you can quickly and simply programme
recordings: With these TV sets, you can call up the transmission
schedule of the TV channel, mark the programmes to be
recorded and automatically transfer their details into the
memory of the video recorder. Please look in the instructions for
your TV set to find out whether and how you can benefit from
this function.
2 Use
==PP--
or
;;PP++
to select the option
TIMER RECORDING and confirm with P