Filter
Top Products
ONE TIME PROGRAM
PROGRAM 1
CHANNEL +/– – – –
START +/– – – : – – AM
STOP +/– – – : – – AM
REC SPEED SLP
DATE +/– – – /– – /– –
SET DAILY=8 OR WEEKLY=9
TO END PUSH EXIT
36 Quick Programming
Follow the steps below to program your VCR to record TV pro-
grams while you’re away from home. The VCR will turn itself on,
record, and turn itself off automatically.
Before you begin make sure:
• Channels are programmed. Details are on pages 11 - 12.
• The clock is set. Details are on pages 13 - 17.
• There is a tape in the VCR. Make sure the tape’s record tab is
intact and the tape is long enough to record the program(s).
• The VCR is in VCR position. The VCR light will appear on the
display panel when the VCR is in VCR position. If the VCR light
does not appear, press the VCR/TV button once.
• When you use a Cable Box/DBS, timer recordings are pro-
grammed differently. Read pages 8 - 9 before proceeding.
• Complete each step within 60 seconds of the previous step.
1
Press the VCR button, then press the TIMER button.
2
Press the PLAY 8 or STOP 9 button to select QUICK
PROGRAMMING, then press the :/OK button.
3
Press the CH(annel) 8/9 buttons to enter the channel
you want to record.
• If you are using a standard antenna or cable to VCR to TV
hookup (as shown on pages 6 - 7), enter the channel of the TV
program you want to record.
• If you are using a Cable Box/DBS, enter the Cable Box/DBS
output channel (03 or 04). Leave the Cable Box/DBS on for a
timer recording.
SELECT , 9 CHOOSE :/OK
A VCR PLUS+
QUICK PROGRAMMING
PROGRAM REVIEW
TO END PUSH EXIT
ONE TIME PROGRAM
PROGRAM 1
CHANNEL +/– 12
START +/– – – : – – AM
STOP +/– – – : – – AM
REC SPEED SLP
DATE +/– – – /– – /– –
SET DAILY=8 OR WEEKLY=9
TO END PUSH EXIT
1
3
2
POWER
CBL/DBS
TV VCR
VCR/TV EJECT
MENU
QUICK PROGRAMMING
EXIT/STATUS
TIMER
SLOW/BACK
SLOW/
FORWARD
SKIP SEARCH
STILL/SLOW
1 2 3
4 5 6
7 8 9
0
CLEARSPEED
AUDIO/MUTE
INDEX
START
+
+
–
–
+
–
STOP DATE
DBS DAILY WEEKLY
STOP
/OK
PLAY
VOL CH
/OTR
REC
VRZ264 4/8/99 7:29 PM Page 36