Pioneer 655A DVD Player User Manual


 
Connecting Up02
12
En
6 VIDEO OUT
Standard video output(s) that you can
connect to your TV or AV receiver using the
supplied audio/video cable
(pages 13, 15, 16).
(DV-655A has two Video outputs)
7 COMPONENT VIDEO OUT
High quality video output for connection to a
TV, monitor or AV receiver that has compo-
nent video inputs.
Connect using a commercially available
three-way component video cable. Be careful
to match the colors of the jacks and cables
for correct connection (page 14).
8 D1/D2 VIDEO OUT (DV-655A Taiwan
model only)
Use to connect this player to a TV with a
D video input (page 14).
9 AC IN
Connect the supplied power cord here, then
plug into a power outlet.
You may find it useful to have the
manuals supplied with your other
components handy when connecting
this player.
If you come across any unfamiliar terms
in this section of the manual, take a look
at the Glossary starting on page 70.
When connecting this player up to your
TV, AV receiver or other components,
make sure that all components are
switched off and unplugged.
1 CONTROL IN / OUT
For passing remote control signals to other
Pioneer components (page 17).
2 DIGITAL AUDIO OUT – OPTICAL /
COAXIAL
Digital audio outputs for connection to a
PCM, Dolby Digital, DTS and/or MPEG-
compatible AV receiver (page 16).
3 AUDIO OUT (2ch)
Two channel analog audio outputs for
connection to your TV, AV receiver or stereo
system (pages 13, 15, 16).
4 AUDIO OUT (5.1ch)
Multichannel analog audio outputs for
connection to an AV receiver with
multichannel inputs (page 15).
5 S (S-Video output)
S-Video output(s) that you can use instead of
the video output described in 6 below (page
14).
(DV-655A has two S-Video outputs)
Rear panel
DIGITAL AUDIO
OUT
AUDIO
OUT
(2ch)
CONTROL
OPTICAL COAXIAL
IN OUT
L
R
L
R
AUDIO OUT
(5.1ch)
CENTER
SUB
WOOFER
SURROUND
FRONT
S-VIDEO
OUT
VIDEO
OUT
COMPONENT VIDEO OUT
P
B
P
R
Y
DV-655A Taiwan model
1
12
2
D1/D2
VIDEO OUT
1
2
3
4 5
6 7 8 9