Filter
Top Products
03
20
En
Chapter 3
Getting Started
Making settings using the
Setup Navigator menu
Be sure to perform these settings when using the player for the first
time.
Caution
• Before turning on the power, check that the connections
between the player and other devices are correct.
1 Turn on the power.
Press STANDBY/ON.
2 Turn on the TV’s power and switch the input.
See the TV’s operating instructions for instructions on operating the
TV.
Check that the Setup Navigator menu is displayed.
If TV Control is set, the TV can be operated with the player’s remote
control (page 22).
If the Setup Navigator menu is not
displayed
Press HOME MENU to display the Home Menu, select
Initial Setup Setup Navigator Start, then press ENTER.
3 Select the OSD language.
Use / to select, then press ENTER.
When you have this player connected to a Pioneer Flat Panel TV that
is compatible with HDMI Control, language settings are imported
from the Pioneer Flat Panel TV’s language settings before Setup
Navigator begins.
4 Select and set the video and audio output terminals.
Select the actually connected video and audio output terminals.
Use /// to select, then press ENTER.
•When HDMI is selected for Video or Audio, proceed to step 5.
•When Component Video is selected for Video, proceed to step
6.
•When S-Video/Video is selected for Video, proceed to step 7.
Caution
•When HDMI is selected for Video, no video signals are output
from the COMPONENT VIDEO, S-VIDEO or VIDEO output
terminals.
•When Component Video or S-Video/Video is selected for
Video, no video signals are output from the HDMI OUT
terminal.
• The video and audio signals output from the set output terminals
are output synchronously (lip synchronization).
•When S-Video/Video or Component Video is selected at
Video, no sound is output if HDMI is selected at Audio (the
warning message shown below is displayed).
Follow the procedure below to redo the connections, then select
the proper connection at the setup screen.
STANDBY/ON
OPEN/CLOSE
TV CONTROL
INPUT
SELECT
CH
VOL
TOP MENU
TOOLS
HOME
MENU
RETURN
ENTER
Setup Navigator
BD PLAYER
Please select the on-screen display language.
Audio, subtitle and BDMV/DVD-Video menu
language will also be set.
Setting item Output terminal name
Video
HDMI HDMI Output
Component Video Video Output Component Video
S-Video/Video S-Video
Video
Audio
HDMI HDMI Output
Digital Audio Digital Audio
Output
Coaxial
Optical
Analog Audio Audio Output (2ch)
Audio Output (7.1ch)
TOP MENU
TOOLS
HOME
MENU
RETURN
ENTER
Setup Navigator
BD PLAYER
Select the output terminals to be used for
the video and audio signals of this player.
Use [ ][ ] to select video or audio, then
press [ ][ ] to select the output terminal.
HDMI
HDMI
Video
Audio