Pioneer DV-233 DVD Player User Manual


 
11
En
Rear Panel
1 AUDIO OUT jacks
Use to output two-channel audio (analog) to the
audio stereo inputs on a TV or stereo amplifier. If you
are connecting to a receiver that has both digital and
analog input jacks for DVD player connection, it may
be beneficial to make both connections (pages 14,
15).
2 VIDEO OUT jack
Connect to the video input on a TV or monitor or AV
amplifier or receiver with video input capability.
When using this output, be sure to set VIDEO OUT
SELECT to the right position (pages 14, 16).
3 COMPONENT VIDEO OUT jacks
If your TV or monitor has component video inputs,
you can produce a higher quality picture on your TV
or monitor by connecting to the component video
outputs on this unit. When using these jacks, be
sure to set VIDEO OUT SELECT to the left position
(page 16).
4 CONTROL IN jack
Use to connect this player to another component
bearing the Pioneer Î mark. This lets you control
this unit as though it were a component in a system.
Player operations are then performed by pointing the
remote control at the component that the player is
connect to (page 16).
5 AC IN power cord connection terminal
Use to connect the power cord to the wall outlet
(page 14).
6 S-VIDEO OUT jack
If your TV or monitor has an S-video input, clear
picture reproduction is possible by connecting the
player to your TV or monitor via the S-Video jack.
When using this output, be sure to set VIDEO OUT
SELECT to the right position (page 16).
You can switch between [S1] and [S2] S-video
output from the Setup menu (page 29).
7 VIDEO OUT SELECT switch
Use to set which output is used to output the video
signals. Select either video/S-video or component
video signal output depending on the connections
you make (page 16).
8 DIGITAL OUT jack (coaxial)
Use to output the digital audio signal recorded on
discs. You can output the digital signal via either
coaxial output jack to an AV amplifier or receiver
(page 15).
9 DIGITAL OUT jack (optical (OPT.))
Use to output the digital audio signal recorded on
discs. You can output the digital signal via either
optical output jack to an AV amplifier or receiver
(page 15).
COMPONENT
VIDEO OUT
AUDIO OUT
VIDEO OUT
S-VIDEO
OUT
VIDEO OUT
SELECT
OPT.
CONTROL
IN
AC IN
Y
P
B
P
R
L
R
DIGITAL
OUT
1
23
4
5
6
789
NAMES AND FUNCTIONS