Pioneer DV-420V-K DVD Player User Manual


 
En
Appendix
06
English
37
<J2L90221A>
Additional information
3736
Problem Check Remedy
Disc cannot be played or disc
tray opens automatically.
Is the disc scratched? Scratched discs may not play.
Is the disc dirty? Wipe the dirt off the disc (page 45).
Is the disc properly set in the disc
tray?
Set the disc with the printed side facing up.
Set the disc within the groove in the disc
tray.
Does the disc have the right region
number?
Discs with the region number “1 (including
1)” and “ALL” can be played on this player.
Is the player placed in a humid
location?
There could be condensation inside. Wait a
while for the condensation to evaporate. Do
not place the player near an air‑conditioner,
etc. (page 44).
The player’s power turns off
automatically.
Is Auto Power Off set to On? If Auto Power Off is set to On, the player’s
power turns off automatically if no operation
is performed for over 30 minutes (page 34).
Power turns on or off automati
cally.
Is KURO LINK set to On? The player’s power may turn on together
with the power of the TV connected to the
HDMI OUT terminal. If you do not want
the player’s power to turn on when the TV’s
power is turned on, set KURO LINK to Off
(page 34).
Input of connected TV and AV
system switches automatically.
Is KURO LINK set to On? The input of the TV and AV system (AV
receiver or amplifier, etc.) connected to the
HDMI OUT terminal may automatically
switch to the player when playback starts
on the player or the menu screen (Home
Menu, etc.) is displayed. If you do not want
the inputs of the connected TV and AV
system (AV receiver or amplifier, etc.) to
switch automatically, set KURO LINK to Off
(page 34).
Picture is not displayed. Is the video cord properly con
nected?
Connect the cord properly, inserting the
plug all the way in.
Is the video cord damaged? If the video cord is damaged, replace it with
a new cord.
Is the input on the connected TV
or AV receiver or amplifier properly
set?
Switch to the proper input, referring to the
connected device’s operating instructions.
Picture is stretched, or aspect
ratio cannot be switched.
Is the aspect ratio properly set on
the connected TV?
Refer to the TV’s operating instructions and
set the TV’s aspect ratio properly.
Is TV Screen properly set? Set TV Screen properly (page 31).