Filter
Top Products
En
Appendix
06
English
39
<J2L90221A>
Additional information
3938
Problem Check Remedy
Multichannel audio signals are
not output.
Is the audio output properly set
on the connected AV receiver or
amplifier, etc.?
Refer to the connected AV receiver or ampli‑
fier’s operating instructions and check the
audio output settings.
Switch the disc’s audio to multichannel
audio using the menu screen or AUDIO.
Is Digital Audio Out set to audio
signals the AV receiver or ampli‑
fier, etc., supports?
Refer to the connected AV receiver or ampli‑
fier’s operating instructions and check the
audio signals it supports.
Set Digital Audio Out according to the
audio signals supported by the AV receiver
or amplifier, etc. (page 30).
DTS audio signals are not
output.
Are connections proper? Properly connect the AV receiver or ampli‑
fier, etc., to the DIGITAL AUDIO OUT
COAXIAL terminals.
Does the connected AV receiver or
amplifier, etc., support DTS audio
signals?
If the connected AV receiver or amplifier,
etc., does not support DTS audio signals, set
DTS Out to Off (page 30).
Is the audio output properly set
on the connected AV receiver or
amplifier, etc.?
If the connected AV receiver or amplifier,
etc., supports DTS audio signals, change
the audio output of the AV receiver or ampli‑
fier, etc., to a setting allowing output of DTS
audio signals.
96 kHz/
88.2 kHz digital audio
signals are not output from the
DIGITAL AUDIO OUT
COAXIAL terminals.
Is 96 kHz PCM Out set to 96kHz? Set 96 kHz PCM Out to 96kHz > 48kHz.
Are you playing a copyright‑pro‑
tected disc?
The 96 kHz/
88.2 kHz digital audio signals of
copyright‑protected discs cannot be output.
Folder or file names are not
recognized.
Have you exceeded the maximum
number of folder or file names the
player can recognize?
Up to 299 folders can be recognized on
one disc. Up to 648 files can be recognized
within one folder. Depending on the folder
structure, however, the player may not be
able to recognized certain folders or files.
Time is required to play JPEG
files.
Are you playing large files? Some time may be required to display large
files.
Black bars are displayed when
playing JPEG files.
Are you playing files with different
aspect ratios?
Black bars may be displayed along the top
and bottom or sides when JPEG files with
different aspect ratios are played.
When connected to an HDMI-compatible device
Problem Check Remedy
HDMI indicator does not light. Is a DVI device connected? The picture may not be output properly
when a DVI device is connected.
Is the input properly set on the
connected HDMI‑compatible
device?
Refer to the operating instructions of the
connected HDMI‑compatible device and
switch to the proper input.