Filter
Top Products
Controls and displays
03
24
En
Chapter 3
Controls and displays
The following illustrations show the DV-868AVi,
but controls and displays for the DV-668AV are
the same except where indicated.
Front panel
1 POWER switch
(DV-868AVi only)
Press to switch the player on or off (the
player can be put into standby using the
remote control; the
STANDBY
indicator
above the button lights when in standby).
STANDBY/ON
(DV-668AV only)
Press to switch the player into standby.
2 STANDBY indicator
(DV-868AVi only)
Lights when in standby.
3 i.LINK indicator
(DV-868AVi only)
Lights when this player is recognized by
another i.LINK compatible component.
4 HDMI indicator
Lights when this player is recognized by
another HDMl or DVI/HDCP compatible
component.
5 PROGRESSIVE button/indicator
Press to switch the component video output
mode between progressive and interlace. The
indicator lights in progressive scan mode.
See also
Component Out
on page 62.
• This player is compatible with both PAL
and NTSC progressive scan formats.
However, your TV must also be
progressive scan compatible to take
advantage of this feature.
6 PURE AUDIO button/indicator
When the player is stopped, press to switch
off/on the front panel display and disable the
video and digital outputs*. Use this when you
want to hear audio from the analog outputs
with no interference from other signals (when
listening to a DVD-Audio disc, for example).
The indicator lights when the Pure Audio
feature is switched on.
* These include i.LINK, HDMI, and the
coaxial and optical digital outputs.
POWER
STANDBY
OFF ON
Î
AUDIO/VIDEO
‹
OPEN/CLOSE
)
*&
$! ⁄›
PROGRESSIVEHDMI PURE AUDIO
98
7
321 54
6
10 11
13141516 12
RW
COMPATIBLE
868en.book.fm 24 ページ ２００３年８月１９日 火曜日 午前９時３０分