Filter
Top Products
Initial Settings menu
08
77
En
English
Change this setting to
Off
if the i.LINK
interface is still connected but you need to
use one of the other outputs. Changing this
setting to
Off
does not affect i.LINK thru data
(i.e., if this player is between two other i.LINK
components, it will still pass data between
them).
Set back to
On
(i.LINK-ready) to be able to use
the i.LINK interface.
Connections Setup
You only need to make this setting if you
connected this player to other equipment
using the i.LINK interface.
This screen shows the equipment connected
using the i.LINK interface.
Components which are able to receive
i.LINK Audio are shown in black (an i.LINK
receiver, for example); those which can’t (a
DV camcorder, for example) are shown in
gray. If the player can’t display the name of a
component, ‘
****
’ is shown; if the name
can’t be determined,
Unknown
is displayed.
Select the component that you want to set up
the audio output formats for.
This screen shows the output settings for
Dolby Digital, DTS and MPEG audio.
Depending on the other component, these
may be configured automatically. If this
player can’t determine the appropriate
settings, the defaults are
Dolby Digital
,
DTS
and
PCM
. If you need to change the settings,
move the cursor right and make the new
setting.
Auto Select Play
• Default setting:
Off
You only need to make this setting if you
connected this player to other equipment
using the i.LINK interface.
Using this setting you can specify up to five
receivers to automatically switch input
function to this player when you start
playback of a disc. Highlight a receiver from
the list and press
ENTER
.
The most recently selected component is
marked with a orange box (
). The i.LINK
output when playing Dolby Digital, DTS or
MPEG discs will be as set for this component
(see also
Connections Setup
above).
Select
Off
to reset all the settings.
Digital Audio Out
Video Output
Language
Display
Options
Speakers
i.LINK Setup
Audio Out
Connections Setup
Auto Select Play
DVD-Audio Out
Initial Settings
VSX-49TXi
VSX-AX10i
DV-47Ai
Digital Audio Out
Video Output
Language
Display
Options
Speakers
i.LINK Setup
Initial Settings
Connections Setup
VSX-49TXi : Pioneer
DolbyDigital
DTS
MPEG
PCM
DTS
MPEG
Digital Audio Out
Video Output
Language
Display
Options
Speakers
i.LINK Setup
Audio Out
Connections Setup
Auto Select Play
DVD-Audio Out
Off
VSX-49TXi
VSX-AX10i
Initial Settings
868en.book.fm 77 ページ ２００３年８月１９日 火曜日 午前９時３０分