Pioneer DV-250 DVD Player User Manual


 
The Audio Settings Menu
06
39
En
Audio DRC is only effective with Dolby
Digital audio sources.
Audio DRC is only effective through the
digital output when Digital Out is set to
On, and Dolby Digital Out is set to
Dolby Digital > PCM. See page 41.
The effect of Audio DRC depends on
your speakers and AV receiver settings.
Virtual Surround
Default setting: Off
Switch on Virtual surround to enjoy surround
sound effects from just two speakers.
When you play a Dolby Digital soundtrack,
Virtual Dolby Digital, which uses
TruSurround technology from SRS, produces
a deep, realistic 3D soundspace from a pair
of stereo speakers.
Audio DRC
Default setting: Off
When watching Dolby Digital DVDs at low
volume, it’s easy to lose the quieter sounds
completely—including some of the dialog.
Switching Audio DRC (Dynamic Range
Control) to On can help by bringing up the
quieter sounds, while controlling loud peaks.
How much of a difference you hear depends
on the material you’re listening to. If the
material doesn’t have wide variations in
volume, you may not notice much change.
1 Press SETUP and select ‘Audio Set-
tings’ from the on-screen display.
Audio Settings
Play Mode
Setup Navigator
Disc Navigator
Initial Settings
2 Highlight Audio DRC, then use the
/
buttons (cursor left/right) to change
to On or Off, as required.
Audio Settings
Audio DRC
Virtual Surround
Off
Off
3 Press ENTER to make the setting and
exit the Audio Settings screen.