Filter
Top Products
Initial Settings menu
09
48
En
Chapter 9
Initial Settings menu
Using the Initial Settings
menu
The Initial Settings menu gives you complete
control in setting up your DVD player,
including audio, and video output settings,
audience limitation settings, among others.
If an option is grayed out it means that it
cannot be changed at the current time. This is
usually because a disc is playing. Stop the
disc, then change the setting.
1 Press HOME MENU and select ‘Initial
Settings’ from the on-screen display.
2 Select the setup category from the list
on the left, then select an item from the
menu list to the right.
3 Make the setting you want.
• The language options shown in the on-
screen display illustrations on the
following pages may not correspond to
those available in your country or region.
Digital Audio Out settings
Digital Out
You only need to make this setting if you
connected this player to an AV receiver (or other
component) using one of the digital outputs.
• Default setting: On
If at any time you need to switch off the digital
audio output, set this to Off, otherwise leave
it On.
Note that you can’t switch on/off the optical
and coaxial outputs individually.
Dolby Digital Out
You only need to make this setting if you
connected this player to an AV receiver (or other
component) using one of the digital outputs.
• Default setting: Dolby Digital
Audio Settings
Play Mode
Setup Navigator
Disc Navigator
Initial Settings
Video Adjust
HOME MENU
DVD
Digital Audio Out
Video Output
Language
Display
Options
Digital Out
Dolby Digital Out
DTS Out
96 kHz PCM Out
MPEG Out
On
Off
Initial Settings
Digital Audio Out
Video Output
Language
Display
Options
Digital Out
Dolby Digital Out
DTS Out
96 kHz PCM Out
MPEG Out
Dolby Digital
Dolby Digital > PCM
Initial Settings