Pioneer DV-S969AVi DVD Player User Manual


 
Connecting up
02
24
En
Connecting using HDMI
If you have a HDMI or DVI-equipped monitor
or display, you can connect it to this player
using a commercially available HDMI cable.
The HDMI connector outputs uncompressed
digital video, as well as almost every kind of
digital audio that the player is compatible
with, including DVD-Video, DVD-Audio (see
below for limitations), Video CD/Super VCD,
CD and MP3.
1 Use an HDMI cable to connect the
HDMI OUT interconnect on this player to
an HDMI interconnect on a HDMI-compat-
ible monitor.
The arrow on the cable connector body
should be face up for correct alignment
with the connector on the player.
When you first switch on the player, you will
see the HDMI settings menu appear on your
monitor or display. From here you can select
the resolution, aspect ratio and audio
settings, as well as adjust the video presenta-
tion to your liking. For more on these settings
see
HDMI Settings
on page 73.
HDMI
or
DVI
appears in the front panel
display according to the compatibility of the
component connected.
An HDMI connection can only be made
with DVI-equipped components compat-
ible with both DVI and High Bandwidth
Digital Content Protection (HDCP). If you
choose to connect to a DVI connector, you
will need a separate adaptor
(DVI
HDMI) to do so. A DVI/HDCP
connection, however, does not support
audio signals. Consult your local audio
dealer for more information.
When you change the component
connected to the HDMI output, you will
also need to change the HDMI settings to
match the new component (see
HDMI
Settings
on page 73 to do this). However,
the settings for each component are then
stored in memory (for up to 5 compo-
nents).
The HDMI connection is compatible with
44.1/48kHz, 16/20/24 bit 2 channel linear
PCM signals, as well as Dolby Digital, DTS
and MPEG audio bitstream.
It is not possible to output SACD or copy-
controlled DVD-Audio CPPM sources
from the HDMI connection.
About HDMI
HDMI (High Definition Multimedia Interface)
supports both video and audio on a single
digital connection for use with DVD players,
DTV, set-top boxes, and other AV devices.
HDMI was developed to provide the technolo-
gies of High Bandwidth Digital Content
Protection (HDCP) as well as Digital Visual
Interface (DVI) in one specification. HDCP is
used to protect digital content transmitted
and received by DVI-compliant displays.
AUDIO
OUT
(2ch)
AUDIO
OUT
(5.1ch)
CONTROL
OPTICAL
COAXIAL
IN OUT
R
L
L
R
CENTER
SUB
WOOFER
SURROUND
FRONT
S-VIDEO
OUT
VIDEO
OUT
COMPONENT VIDEO OUT
PB PR
Y
21
21
(AUDIO)
S400
DIGITAL AUDIO
OUT
HDMI OUT
HDMI-compatible display
HDMI
connector
DV-59AVi.book(KU).fm 24 ページ 2003年8月20日 水曜日 午後6時46分