Filter
Top Products
Audio Settings menu
06
59
En
5 Press ENTER to make the settings and
exit the audio settings screen.
• You can’t adjust the channel level for any
speakers that are set to
Off
in the
Speaker Installation
menu screen (see
Speaker Installation
on page 76).
• The
Fix
setting is equivalent to setting all
the channel levels to
+6 dB
. Therefore, the
Variable
setting will usually sound
quieter than the
Fix
setting.
Speaker Distance
• Default setting: all speakers
10ft. / 3 m
To get the best surround sound from your
system, you should set up the speaker
distances from your listening position.
1 Press HOME MENU and select ‘Audio
Settings’ from the on-screen display.
2 Move the cursor down until you reach
the Speaker Distance setting screen.
DV-S969AVi screen
• Use the joystick (up/down) to select a
speaker.
• Use the joystick (left/right) to adjust the
distance from your listening position to
that speaker.
Front left/right (
L/R
) speaker distances can be
set from 1ft. / 30 cm to 30ft. / 9 m in 0.5 ft. / 10
cm increments.
The center speaker (
C
) and subwoofer (
SW
)
can be set from –6.5 ft. / –2 m to +6.5 ft. / +2
m relative to the front left/right speakers.
Surround left/right (
LS/RS
) speakers can be
set from –20 ft. / –6 m to +6.5 ft. / +2 m rela-
tive to the front left/right speakers.
When you adjust the front left (
L
) or front right
(
R
) speaker, all the other speaker distances
are adjusted relative to that speaker.
3 Press ENTER to make the settings and
exit the audio settings screen.
• The speaker distance settings have no
effect on SACD playback. The channel
level settings, however, do apply.
Audio Settings 2/ 2
Speaker Distance L
Speaker Distance C
Speaker Distance R
Speaker Distance RS
Speaker Distance LS
Speaker Distance SW
3m
3m
3m
3m
3m
3m
DV-59AVi.book(KU).fm 59 ページ ２００３年８月２０日 水曜日 午後６時４６分