Filter
Top Products
Initial Settings menu
08
76
En
If you connected this player to an AV receiver
using the 5.1 channel analog outputs, set this
to
5.1 Channel
. This will enable you to enjoy
multichannel sound.
If you connected only the stereo analog
outputs, set to
2 Channel
. On this setting
multichannel audio is downmixed to 2 chan-
nels for stereo analog output.
• When set to
5.1 Channel
, you’ll only get
sound from all speakers when playing
multichannel discs.
• When set to
5.1 Channel
the
AUDIO
OUT (2ch)
jacks output the front L/R
channels of multichannel discs.
• When set to
5.1 Channel
there is no
optical/coaxial digital or HDMI output
when playing DVD-Audio discs.
• Some DVD-Audio discs don’t allow down-
mixing of audio. These discs always
output multi-channel audio regardless of
the setting made here.
Speaker Installation
• Set in Setup Navigator (default:
L/R:
Large | C: Large | LS/RS: Large| SW: On
)
You only need to make this setting if you
connected this player to your amplifier using
the 5.1 channel analog outputs.
This setting does not affect any digital audio
output.
Use the
Speaker Installation
screen to tell
the player what kinds of speakers you have
connected.
1 Use the Joystick to move the cursor
up/down to select a speaker.
• The
L
and
R
, and
RS
and
LS
speakers are
paired; you can’t set them differently.
2 Move the cursor right to modify the
selected speaker.
3 Use the Joystick (up/down) to change
the current setting.
• You can see the effect of your changes in
the room graphic on the right of the
screen.
• Except for the subwoofer, you can set
speaker size to
Large
or
Small
. If the main
speaker cone in the speaker is 12cm or
more, set to
Large
, otherwise set to
Small
(or
Off
if you don’t have that speaker).
• If you set the front
L
and
R
speakers to
Small
, the center and surround speakers
are automatically set to
Small
and the
subwoofer to
On
.
• The subwoofer can only be set to
On
or
Off
.
4 Move the cursor left to go back to the
speaker list if you want to modify another
speaker, or press ENTER to exit the
Speaker Installation screen.
Digital Audio Out
Video Output
Language
Display
Options
Speakers
i.LINK Setup
Audio Output Mode
Speaker Installation
Speaker Distance
Channel Level
3 2 Channel
3 Fix
Initial Settings
Digital Audio Out
Video Output
Language
Display
Options
Speakers
i.LINK Setup
L
C
R
RS
LS
SW
Large
Large
Large
Large
Large
On
Initial Settings
DV-59AVi.book(KU).fm 76 ページ ２００３年８月２０日 水曜日 午後６時４６分