Filter
Top Products
DataMan2
Operating Instructions
This versatile area of DataMan2 supports blackboard editing and additions. The
available actions are as follows:
• Edit Box – to add, edit or delete text data on the blackboard
• Open Fig-Data-Display – to reveal existing data without edit options
• Refresh Board – to re-draw the graphic and/or text
• Group No. – the group number associated with the current display
• Unit No. – provides a quantity for the number of units out of the total units (# / #)
The buttons to the right of this field allow scrolling through the available units with
Draw showing the current unit.
• Data No. – shows the number of the data out of the total quantity of data (# / #)
The buttons to the right of this field allow scrolling through the available data
objects with Draw showing the current data object.
To work with existing blackboard data, follow the directions below.
1. Select the group number.
2. Click on Draw to reveal the first unit or object.
3. Click on Refresh Canvas to clear the drawing.
4. Select Previous Unit or Next Unit to move through the blackboard data.
To add or edit the blackboard data, click on the Edit Box button and make your
changes. Once edits are complete, click on the appropriate Data Edit button.
To add text data to the blackboard, follow the directions below.
1. Type in the text on the line of your choosing (1 through 10 available).
2. Click on the Test display button.
The canvas area changes to reveal the added text on the blackboard display.
Press the Clear button erases the text just added.
DataMan2.doc Page 20 of 35