Filter
Top Products
DataMan2
Operating Instructions
5.1 Command File
The two options under Command File support opening an existing file or to save a changed
file. Only a single command file may be open at a time. If a file is already open on the
monitor screen, opening a second command file replaces the original file with the new file.
The original file is removed from the window but remains unaffected. However, any changes
or corrections to the original file are lost. Save the file to the PC using the Save button
(located below the Open File button) before accessing a another command file.
5.2 Command List
There are two options under Command List. The button labeled Command List calls a
dialog box to assist with available commands and the codes associated with the commands.
Note: Please review RS-232 code data in
the DVD player’s Command Protocol
Manual available from the Service and
Support – Business Products area
of the Pioneer website.
www.pioneerelectronics.com
To create a command, follow the instructions below.
1. Click on the Command List button to open the dialog box.
2. Confirm that the Command List Type field is set to Player Command List.
3. Select a command from the list.
4. Use the Command Edit Box
to add a modifier or value, if necessary.
Although an RS-232 code may be available from the list, some actions require
numeric qualifiers. Actions such as a search or a subtitle selection must include a
numeric value.
5. Click on the Copy & Paste button at the bottom of the dialog box.
6. Repeat steps 2 through 4 to add line items until the command is complete.
DataMan2.doc Page 31 of 35