DataMan2
Operating Instructions
The DataMan2 main menu includes the following buttons and settings:
Command Buttons: Communication Settings:
• Weekly Timer
• Barcode Command Stack/Blackboard
• Memory Data
• Real Time Clock
• Command Send Monitor
• Port Select – Com 1/Com 2/Other
• Rate Select – 4800/9600
• Auto Connect
• Disconnect
DataMan2 Main Menu
2.2 Communication Settings
The communication settings must be established before working with functions and sending
commands using DataMan2. There are three connection methods, Auto-Connect, manual
connection, and Disconnect.
2.2.1 Auto Connect Option
To automatically set the communications, click on the Auto Connect button on the
right side of the Communications Setting box.
DataMan2.doc Page 3 of 35