Filter
Top Products
Recording
41
En
05
4 Select ‘Store Programme’ to finish.
• Other options in the same menu panel
allow you to name the programme, and
change the recording destination and/or
recording mode.
Checking/editing timer recording
settings
You can check and/or edit the timer
recording settings made by the VCR Plus+
system by selecting
Details
from the
PlusCode# setting screen.
1 Select ‘Details’ from the
PlusCode# setting screen.
The Timer Programme Set screen appears,
filled out with the timer recording details.
2 Check and edit the fields as
necessary.
See
Setting a manual timer recording
on
page 42 for more on this.
3 Select ‘Store Programme’ to
save the timer programme and exit.
VCR Plus+ programming with the
power off
You can enter a PlusCode programming
number when the recorder is in standby.
Note that the recording is always made to
the HDD. If you want to record to a DVD disc,
you’ll need to switch on the power and use
the full VCR Plus+ programme screen.
Important
• You can’t use this feature until you have
set up the guide channels. see
VCR
Plus+ CH Setting
on page 105.
• You can’t change the recording mode.
• You can’t programme daily or weekly
timer recordings.
1 Press ‘VCR Plus+’.
The front panel display shows the current
recording mode and prompts you to enter
the PlusCode programming number.
2 Use the number buttons to enter the
PlusCode number.
• To clear the last digit entered, press
CLEAR
.
3 Press ENTER.
The display shows the timer settings:
Date
Start time
End time
HDD and
Recording channel
Recording mode
• If
CODE ERROR
appears in the display,
check that the number is correct and
that the guide channel is set (see
VCR
Plus+ CH Setting
on page 105), then set
the timer recording again.
• If
CAN’T SET
appears in the display, it
means that although you entered a valid
PlusCode number, the programme has
already finished.
ENTER
ENTER
05 Recording.fm 41ページ ２００７年２月２３日 金曜日 午後５時１７分