Filter
Top Products
Recording 05
35
En
Changing audio channels
Taiwan and Philippines model:
Some TV programs are broadcast with both
a main and a Second Audio Program (SAP).
You can change the TV audio using the
AUDIO
button.
• Press to change the audio type.
The current audio channel is displayed on-
screen.
• If
SAP
is selected, but there is no SAP
channel being broadcast, you will still
hear the main audio channel.
• If the sound is poor quality when set to
Stereo
, you can often improve it by
changing to
Mono
.
Note
• When recording to the HDD with HDD
Recording Format set to Video Mode On,
to DVD in Video mode, or on the
LPCM
setting, only one channel of a dual mono
broadcast is recorded. In this case,
decide which language you want to
record before recording by setting the
Dual Mono Recording setting (see
Dual
Mono Recording
on page 109).
Other:
You can change the audio channel of the
broadcast or external input signal.
• Press to change the audio type.
The current audio channel is displayed on-
screen.
• If the NICAM audio setting (see
NICAM
Select
on page 108) is set to
NICAM
and
you are watching a NICAM broadcast,
you can switch between
NICAM
and
Regular
(non-NICAM) audio.
• If the NICAM broadcast is bilingual, you
can also select the language.
• You can also select the language for a
non-NICAM bilingual broadcast.
• When watching a recording made from
an external input with
Bilingual
recording selected (see
External Audio
on page 108), you can switch the audio
channel between left (
L
), right (
R
) or both
(
L+R
).
Note
• When recording to the HDD with HDD
Recording Format set to Video Mode On,
to DVD in Video mode, or on the
LPCM
setting, only one channel of a bilingual
broadcast is recorded. In this case,
decide which language you want to
record before recording by setting the
Bilingual Recording setting (see
Bilingual Recording
on page 109).
AUDIO
Mono SAP
Stereo
AUDIO
NICAM
Regular
NICAM A NICAM B
Regular
NICAM A+B
A (L) B (R)
A + B (L+R)
LR
L+R
DVR745H_IBD_EN.book 35 ページ ２００６年７月２７日 木曜日 午後４時１１分