Filter
Top Products
Introduction of advanced
TV tuner operation
1
1 Function display
Shows the function names.
1 Press A.MENU button to display MENU.
MENU appears on the display.
2 Touch FUNCTION to display the func-
tion names.
The function names are displayed and oper-
able ones are highlighted.
# To return to the previous display, touch BACK.
# To return to the TV picture, touch ESC.
Note
If you do not operate the function within about 30
seconds, the display is automatically returned to
the TV picture.
Storing the strongest
broadcast stations
sequentially
% Touch BSSM on the function menu to
turn BSSM on.
BSSM begins to flash. While BSSM is flashing
the 12 strongest broadcast stations will be
stored in order from the lowest channel up.
When finished, BSSM disappears.
# To cancel the storage process, touch BSSM
again.
# You can also perform this operation by press-
ing and holding CH CALL on the remote control.
Note
Storing broadcast stations with BSSM may re-
place broadcast stations you have saved using
P1P12.
Selecting the area group
With this unit, channels are preset for each
area group. Selecting the appropriate area
group for your reception area enables recep-
tion of multiple channels.
1 Touch CNTRY on the function menu.
2 Touch c or d to select the area group.
Touch c or d until the desired area group ap-
pears in the display.
COUNTRY 1 (CCIR channel)COUNTRY 2
(IN channel)COUNTRY 3 (CHN channel)
COUNTRY 4 (U.K. channel)COUNTRY 5
(OIRT channel)COUNTRY 6 (AUSTRALIA
channel)COUNTRY 7 (SAF channel)
Area group list and channel name
Area group Display (area name)
Area 1 (CCIR
channel)
SIN(Singapore), MAS(Malaysia),
THA(Thailand), IND(India), PAK
(Pakistan), UAE(UAE), BRN(Bah-
rain), KUW(Kuwait), KSA(Saudi
Arabia), LIB(Libia), EGY(Egypt),
ISR(Israel)
Area 2 (IN chan-
nel)
INA(Indonesia)
Area 3 (CHN
channel)
CHN(China)
TV tuner (SRC mode)
En
14
Section
04