Filter
Top Products
Watching the television
4
1
2
3
Only when using this unit with
STAND ALONE mode, you can perform the
following operations by this unit.
Only the remote control can operate the fol-
lowing functions.
1 Band indicator
Shows which band the TV tuner is tuned to.
2 Preset number indicator
Shows which preset has been selected.
3 Channel indicator
Shows which channel the TV tuner is tuned.
4 Area group indicator
Shows which area group has been selected.
1 Press POWER to turn the TV on.
2 Press BAND to select a band.
3 To perform manual tuning, briefly press
c or d.
The channels move up or down step by step.
# You can also perform manual tuning by press-
ing CHANNEL.
4 To perform seek tuning, press and hold
c or d for about one second and release.
The tuner will scan the channels until a broad-
cast strong enough for good reception is
found.
# You can cancel seek tuning by briefly pressing
either c or d.
# If you press and hold c or d you can skip
broadcasting channels. Seek tuning starts as
soon as you release the button.
Storing the strongest
broadcast stations
sequentially
BSSM (best stations sequential memory) lets
you automatically store the 12 strongest
broadcast stations in order from the lowest
channel up.
% Press CH CALL and hold to turn BSSM
on.
BSSM begins to flash. While BSSM is flashing
the 12 strongest broadcast stations will be
stored in order from the lowest channel up.
When finished, BSSM disappears.
# To cancel the storage process, press and hold
CH CALL again.
Selecting the area group
With this unit, channels are preset for each
area group. Selecting the appropriate area
group for your reception area enables recep-
tion of multiple channels.
1 Press MENU to display the area select
menu.
TV tuner (STAND ALONE
mode)
En
16
Section
05