Filter
Top Products
06 Basic Operations
22
En
Setting MTS/SAP mode
When watching conventional TV programs, you may enjoy
stereo sound and/or Secondary Audio Programs (SAP), using
the Multi-channel Television Sound (MTS) function.
• Stereo broadcasts
You can enjoy, for example, sports, shows, and concerts in
dynamic stereo sound.
• SAP broadcasts
MAIN sound: The normal program soundtrack (either in mono
or stereo).
SAP sound: Listen to second language, supplementary com-
mentary and other information. (SAP is mono sound.)
• Conventional TV programs in this manual designate TV channels that
are received through the conventional VHF/UHF frequencies or
conventional cable TV channels.
• When stereo sound is difficult to hear, you can manually switch to
the MONO mode to obtain clearer sound.
• Once the MONO mode is selected, the Plasma Display sound
remains mono even if the Plasma Display receives a stereo broad-
cast. You must reselect the STEREO mode if you want to hear stereo
sound again.
• Selecting MTS while the input source is in VIDEO, S-VIDEO, COMPO-
NENT and HDMI does not change the type of the sound. In this case,
the sound is determined by the video source.
SPLIT SPLIT P IN P SWAP
SPLIT SPLIT
DTV
SIGNAL MTS LIST
CH
DELETE
INPUT SHIFT
CH+ CH–
Each time you press the MTS button, MTS toggles as shown
below.
SAP MONOSTEREO SAP MONO
STEREO mode SAP mode MONO mode
• In each of the MTS/SAP modes selected using the MTS button, the
display changes depending on broadcasting signals being received.
Using the multiscreen functions
You can display a sub-picture within the main picture. In this
way you can watch a TV program or monitor the video input
from any connected device while watching TV or another video
input.
Use this function following the procedures below to select the
Twin (2-screen) or PIP (picture in picture) mode.
• In the multiscreen function, the sound of a main input is always
output.
PIP (picture in picture)
Main input Sub-picture
Twin 1 (2-screen)
Main input Sub-picture
Twin 2 (2-screen)
Main input Sub-picture
1
Press the MENU button.
2
Press the c or d button to move to Screen, then press
the \ or OK button.
3
Press the c or d button to move to PIP/TWIN, then
press the \ or OK button.
Screen
Screen Size Auto
Main Input Analog TV
PIP/TWIN
Screen Saver
Move Adjust Return
07-PDP42A3HD-Eng (19-23) 05.4.20, 4:30 PM22