Pioneer PDP-507XG Flat Panel Television User Manual


 
Useful adjustment settings
09
36
En
6 Press HOME MENU to exit the menu.
Note
To restore the factory defaults for all the items, press / to
select "Reset" in step 4, and then press ENTER. A confirmation
screen appears. Press / to select "Yes", and then press
ENTER.
Color system setting
If an image does not appear clearly, select another color system
(e.g., PAL, NTSC).
1 Press HOME MENU.
2 Select “Option“ (/ then ENTER).
3 Select “Color System“ (/ then ENTER).
4 Select a video signal system (/ then ENTER).
You can select "Auto", "PAL", "SECAM", "NTSC", "4.43NTSC",
“PAL-M” or “PAL-N”.
With "Auto" selected, input signals are automatically identified.
5 Press HOME MENU to exit the menu.
Note
The factory default is "Auto".
You need to perform color system setting for each of INPUT 1,
2, 3 and 5.
For the color system setting, see steps 11 and 12 under Setting
up TV channels manually on page 25.
Selecting a screen size manually
Press ff
ff
to switch among the screen size options selectable for
the type of video signals currently received.
Each time you press ff
ff
, the selection is switched.
The selectable screen sizes differ depending on the types of input
signals.
Important
If images with black bands on both sides or top and bottom of
the screen – when using the “4:3”, “FULL 14:9”, “Dot by Dot” or
“CINEMA 14:9” modes, for example – are displayed
continuously for long periods or for shorter periods of time over
several days, image retention may result. It is recommended
that you enjoy watching images displayed in full screen, except
when doing so may result in copyright infringement.
AV mode
PC mode (for non-XGA signals)
PC mode (for XGA signals)
AV mode
Color System
Auto
PAL
SECAM
NTSC
4.43NTSC
PAL-M
PAL-N
Item Description
4:3 For 4:3 "standard" pictures. A side mask appears on each
side.
FULL 14:9 For 14:9 squeeze pictures. A thin side mask appears on each
side.
CINEMA 14:9 For 14:9 letterbox pictures. A thin side mask appears on
each side, and you may also see bars on the top and bottom
with some programs.
WIDE In this mode the picture is progressively stretched toward
each side of the screen.
FULL For 16:9 squeeze pictures.
ZOOM For 16:9 letterbox pictures. Bars may appear on the top and
bottom with some programs.
CINEMA For 14:9 letterbox pictures. Bars may appear on the top and
bottom on some programs.
Item Description
4:3 Fills the screen without altering the input signal aspect
ratio.
FULL Full 16:9 screen display.
Dot by Dot Matches input signal with same number of screen pixels.
Item Description
4:3 Matches input signal with the same number of screen
pixels.
Optimized for 1024 x 768 display.
FULL 1 Full 16:9 screen display
Optimized for 1024 x 768 display
FULL 2 For wide signal display
Use when displaying 1360 x 768 signal resolution.
4:3
CINEMA FULL 14:9
ZOOM CINEMA 14:9
FULL WIDE