Filter
Top Products
06 Basic Operations
22
En
4
Select PIP/TWIN Mode and press the \ or OK button
again.
5
Press the c or d button to select the required option as
follows, then press the [ or the BACK button.
Off - PIP - TWIN1 - TWIN2
Off
PIP
TWIN1
TWIN2
PIP/TWIN
PIP/TWIN Mode PIP
PIP/TWIN Input DIGITAL CH
PIP Position
Move Enter Return
• If you set to Off, the following steps are not available.
6
Press the c or d button to move to PIP/TWIN Input,
then press the \ or OK button.
7
Press the c or d button to select the required input
source as follows, then press [ or the BACK button.
DIGITAL CH - ANALOG CH - VIDEO 1 - VIDEO 2 -
VIDEO 3 - S-VIDEO 1 - S-VIDEO 2 - S-VIDEO 3 -
COMPONENT 1 - COMPONENT 2 - HDMI
PIP/TWIN
PIP/TWIN Mode PIP
PIP/TWIN Input DIGITAL CH
PIP Position
DIGITAL CH
ANALOG CH
VIDEO 1
VIDEO 2
VIDEO 3
S-VIDEO 1
S-VIDEO 2
S-VIDEO 3
COMPONENT 1
COMOPNENT 2
HDMI
Move Enter Cancel
•You can select the modes by simply pressing the SPLIT button
on the remote control.
•You can select the sources by simply pressing the SPLIT
INPUT button on the remote control.
• In Twin or PIP mode, press the SWAP button to switch the
position of the 2- screen shown.
If you select “PIP” in the step 5
You can select the position of picture in picture display.
Press the c or d button to move to PIP Position, then press
the \ or OK button.
PIP/TWIN
PIP/TWIN Mode PIP
PIP/TWIN Input DIGITAL CH
PIP Position
Move Enter Return
•You can select the positions by simply pressing the SHIFT
button on the remote control.
8
Press the c or d button to select the required position
for the sub-picture, then press the [ or BACK button.
9
Press the EXIT button.
•You can turn off the sub-picture by simply pressing the EXIT
button on the remote control.
• Multi screen function is available with the following combina-
tions:
DIGITAL CH - ANALOG CH
DIGITAL CH/ANALOG CH - VIDEO1/2/3, S-VIDEO1/2/3,
COMPONENT1/2 or HDMI
(Upper left) (Upper right)
(Bottom left) (Bottom right)
07-PDP42A3HD-Eng (18-22) 5/17/05, 7:28 PM22