Filter
Top Products
The Initial Setup menu
12
78
En
1 Select ‘Input Colour System’, then ‘Next Screen’.
2 Use the CHANNEL +/– buttons or the INPUT
SELECT button to switch between the built-in tuner
and the external inputs.
3 Use the
/
(cursor left/right) buttons to
change the input colour system for the current input
or built-in tuner.
• The available settings depend on the Input Line
System setting (see
Input Line System
on page 74).
The table below shows the different options available.
Component Video Out
• Default setting:
Interlace
You only need to make this setting if you connected this
recorder to your TV using the component video jacks.
If your TV is compatible with progressive-scan
component video, set this
Progressive
for the highest
quality picture. If your TV is not compatible with
progressive-scan video, leave it set to
Interlace
.
See also
Progressive scan video
in the glossary on
page 97.
Important
If you switch to
Progressive
when using a TV that is not
compatible with progressive-scan video, you will not be
able to see anything displayed on your TV. If this happens,
press and hold the
+
button on the front panel, then press
DISC HISTORY
. This will set the recorder’s video output
back to
Interlace
.
NTSC on PAL TV
• Default setting:
Off
When set to
On
, NTSC discs (from the U.S., for example)
will play correctly on a PAL-only TV. Change to
Off
if your
TV is already NTSC-compatible.
Depending on this setting and the Input Line System
setting (see
Input Line System
on page 74), the signal
format output when the recorder is stopped varies as
shown in the table below.
Note
• Many recent PAL TVs are capable of correctly
displaying NTSC pictures without the need for this
setting. Check the manual that came with your TV if
you’re not sure whether yours has this feature.
Input Line System
Built-in tuner External input
625 System Auto Auto
PAL PAL
SECAM SECAM
525 System 3.58 NTSC Auto
3.58 NTSC
PAL–60
Auto
Pr 5
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback
Input Colour System
Component Video
NTSC on PAL TV
Next Screen
Initial Setup
Compatibility of this unit with progressive-scan TVs
Consumers should note that not all high-definition television sets
are fully compatible with this product and may cause artifacts to
be displayed in the picture. In case of 525 progressive scan
picture problems, it is recommended that the user switch the
connection to the ‘standard definition’ output (
Interlace
). If there
are questions regarding our TV set compatibility with this model,
please contact our customer service center.
This recorder is compatible with the following Pioneer displays
and monitors
Plasma display
• PDP-503HDG, PDP-433HDG, PDP-504HDG, PDP-434HDG
Input Line System
NTSC on PAL
TV
Output when
stopped
625 System Off PAL
On PAL
525 System Off NTSC
On PAL–60
Basic
Tuner
Video In/Out
Audio In
Audio Out
Language
Recording
Playback
Input Colour System
Component Video
NTSC on PAL TV
On
Off
Initial Setup
RL_s Singapore.book 78 ページ ２００４年４月２３日 金曜日 午後８時１１分