Pioneer DVR-7000 DVD Player User Manual


 
Recording
41
En
05
Each row of the grid is one day (you can set
the timer recording for up to a month in
advance). Each column is a 15 minute
interval.
The darker area represents time that has
already passed and can’t therefore be
selected. The lighter area is time that’s
available.
6 Set the start time.
The start date and time is displayed in the
middle of the screen.
You can go back and reset the start time
if you need to by pressing
RETURN
.
7 Move the cursor to the
recording end time on the grid.
As you move the cursor around the grid, an
arrow stretches from the start time to the
current cursor position, representing the
length of the recording. A recording of up to
six hours can be set.
8 Set the end time.
9 Select ‘Yes’ to set the timer
recording and exit, or ‘No’ to go back to
the Easy Timer Recording screen.
You can check the timer recording
details you just set from the main timer
recording screen (see
Setting a manual
timer recording
on page 43).
Timer recording using the G-Code
programming system
This system makes programming timer
recordings very simple. Most TV guides
publish G-Code programming numbers with
their programme details. If you want to make
a timer recording of a programme, you just
input the corresponding code. The date,
start, stop and channel settings are made
automatically. All you have to do is tell the
recorder the recording mode, and whether
it’s a once-only recording or a regular
recording.
Note that if the country setting is incorrect
(set in the Setup Navigator), timer
recordings made using the G-Code
programming system may not work as
expected.
1 Press ‘G-Code’ to display the G-Code
programme screen.
You can also access this screen from the
Home Menu (press
HOME MENU
, select
Timer Recording
, then
G-Code system
).
Use the number buttons to enter the
G-Code programming number. (To clear
the last digit entered, press
CLEAR
.)
You can also use the
///
buttons to select digits from the on-
screen display.
2 After making the settings, select
‘Enter’ and press ENTER.
The timer recording screen appears with the
timer programme you just set.
ENTER
AM PM
Easy Timer Recording
7ch
1/01 MON
11:45
SP
REC MODE
11:00
12:00 1:00 2:00 3:00 4:00 5:00
AM
1:45 PM
1/01
1/02
1/03

Recording start time
Recording end time
HDD
HDD/DVD
ENTER
G-Code#
1 3
4 5 6
7 8 9
0
Clear Enter
Details
Cancel
2
DVR650HS_TLT_EN.book 41 ページ 2007年3月20日 火曜日 午後12時19分