Filter
Top Products
Connecting Up02
16
En
• You usually have to connect the same
kind of video cable between your DVD
player and AV receiver, and between
your AV receiver and TV.
Connecting using a digital output
You can also connect this player to your AV
receiver using one of the digital outputs.
There are both coaxial and optical digital
jacks; use whichever is convenient.
We recommend also connecting this player
to your AV receiver using a stereo analog
connection.
1 Connect one of DIGITAL OUT jacks on
this player to a digital input on your AV
receiver.
This enables you to listen to multichannel
surround sound.
For an optical connection, use an optical
cable (not supplied) to connect the OPTICAL
DIGITAL OUT jack to an optical input on
your AV receiver.
• When inserting the plug, the protective
shutter will open and you should hear
the plug click into position when fully
inserted. Take care not to force the plug
as this may damage the shutter, the
cable and/or the player.
For a coaxial connection, use a coaxial cable
(similar to the supplied video cable) to
connect the COAXIAL DIGITAL OUT jack to
a coaxial input on your AV receiver.
2 Connect the analog AUDIO OUT L/R
and VIDEO OUTPUT jacks on this player
to a set of analog audio and video inputs
on your AV receiver.
The diagram shows standard video connec-
tions, but you can alternatively use the
S-Video or component video connections if
they’re available.
3 Connect the AV receiver’s video
output to a video input on your TV.
• You usually have to connect the same
kind of video cable between your DVD
player and AV receiver, and between
your AV receiver and TV.