Filter
Top Products
44
En
04 The Setup Menu
MPEG Out
• Set in Setup Navigator (Default: MPEG
3 PCM)
Move
Exit
SETUP
DTS Out –
96kHz PCM Out –
MPEG Ou
t
i
Audio1 GeneralLanguage OtherVideo2
Dolby Digital Out –
Dolby Digital
Off
96kHz 3 48kHz
MPEG 3 PCM
MPEG
Changes MPEG audio output mode
You only need to make this setting if you
connected this system to another
component (AV amplifier, etc.) using the
optical digital out.
If your AV amplifier (or other connected
component) is MPEG audio compatible, set
to MPEG, otherwise set to MPEG 3
PCM.
Digital Out
• Default setting: On
Move
Exit
SETUP
DTS Out –
96kHz PCM Out –
MPEG Ou
t –
Digital Ou
t
Audio1 GeneralLanguage OtherVideo2
Dolby Digital Out –
Dolby Digital
Off
96kHz 3 48kHz
On
Off
MPEG 3 PCM
You can disable all digital audio output by
setting this to Off.
Audio DRC
• Default setting: On
Move
Exit
SETUP
i
Audio1Audio2 GeneralLanguage OtherVideo
Audio DRC
High
Medium
Low
Off
Dynamic playback at low volume
The dynamic range of a source is the
difference between the quietest and the
loudest sounds. The dynamic range of
Dolby Digital soundtracks can be very
great. This makes them exciting, but it also
means that when you turn the volume
down you can easily lose quiet dialog.
Switch on Dynamic Range control to even
out the soundtrack volume.
• High – the dynamic range is reduced
by a large amount (good for listening
at very low volume).
• Medium – mid setting.
• Low – the dynamic range is reduced
by a small amount.
• Off – default setting (no change to
the dynamics).