Filter
Top Products
10Electronic Program Guide (EPG) (for DTV Only)
63
En
10
Press / to select “VIEW”, “ANALOG” or a
D-VHS recorder, and then press ENTER.
• Select “VIEW” when presetting the program for
auto channel select. Select “ANALOG” when
presetting it for recording via a VCR controller.
Select a D-VHS recorder when presetting it for
recording with a D-VHS recorder.
•In the Info field, “View OK” appears when
presetting for auto channel select is accepted,
and “Rec OK” appears when presetting for
recording is accepted.
Rec/View Timer
Timer Date Start Stop Channel Target Information
Total:1
1/4
Overlap
1
2
3
4
5
6
7
APR 11FRI
--/--
--/--
--/--
--/--
--/--
--/--
9:30 PM
-- : --
-- : --
-- : --
-- : --
-- : --
-- : --
11:00 PM
-- : --
-- : --
-- : --
-- : --
-- : --
-- : --
E 12.05
---.---
---.---
---.---
---.---
---.---
---.---
VIEW View OK
--------
--------
--------
--------
--------
--------
11
If presetting another program, press / to select
another list number, and then repeat steps 4 to 6.
•You can preset up to 28 programs.
12
Press HOME MENU to exit the menu.
• If the schedule of the selected program is overlapped
with another presetting, “Overlap” appears in the Info
field. Presettigs with “Overlap” may not be partially or
entirely executed.
• When entering into the schedule table, pressing
ENTER causes the cursor to jump to an empty field.
•Presetting becomes ineffective if the start time and
the end time are identical or if presetting operations
are performed within two minutes before the start of
the program.
•Presettings made using the EPG are automatically
shown in the schedule table.
•For presetting made using the EPG, “E” appears
beside the channel number in the schedule table. If
you alter the presetting content, “E” disappears.
•For priorities about overlapped presettings, see
“Priority rules for overlapped presettings” on page 63.
• If you switch off the system using the POWER
button, the program presetting will become
ineffective. Be careful not to switch off the power.
Priority rules for overlapped
presettings
When preset TV programs are overlapped, the following
three rules are used to determine a higher priority. If
more than one of the three rules are met, the rules are
applied in the order; 1, 2, then 3.
Rule 1: Presetting for recording is given a higher
priority over presetting for auto channel
select.
Rule 2: If two presettings are overlapped, presetting
with earlier start time is given a higher
priority. If two presettings are sequential, the
last portion of the first program is not re-
corded for 15 seconds because recording of
the second program is started at the exact
start time.
Rule 3: If presettings at the same start time are
overlapped, presetting with a smaller list
number is given a higher priority.
Presetting for recording
Presetting for auto
channel select
The shaded area is not executed.
Program A
Program B
The shaded area is not executed.
PDP-ELITE-Eng (57-64) 9/9/03, 11:4663