Filter
Top Products
Additional information
12
81
En
Connecting external antennas
External AM antenna
Use 5–6 meters of vinyl-insulated wire and set
up either indoors or outdoors. Leave the AM
loop antenna connected.
External FM antenna
Use 75
Ω
coaxial cable to hook up an external
FM antenna.
Connecting auxiliary components
This system has both stereo analog inputs and
outputs, as well as a coaxial digital input. Use
these to connect external components, such
as your VCR, MD or CD-R recorder.
• Connect the LINE 1 (IN) jacks to the
analog outputs of an external playback
component.
These include components such as a VCR or
cassette deck. Connect using RCA pin-plug
stereo cables.
• Connect the LINE 1 (OUT) jacks to the
analog inputs of an external recording
component.
These include components such as a cassette
deck, VCR, MD or another recorder with analog
inputs. Connect using RCA pin-plug stereo
cables.
• Connect the COAX IN (LINE 2) jack on
the rear panel to the coaxial digital output
of an external playback component.
ANT ENNA
AM LOOP
ANT ENNA
FM
UNBAL
75
Outdoor antenna
5–6m
Indoor
antenna
(vinyl-coated
wire)
ANTENNA
AM LOOP
ANTENNA
FM
UNBAL
75
75Ω coaxial cable
AUDIO
ANT ENNA
AM LOOP
ANT ENNA
FM
UNBAL
75
LINE 1
LINE 2
TV
OUT IN IN
L
R
L
R
COAXIAL IN
Tape deck, etc.
AUDIO
OUTPUT
AUDIO
INPUT
COAXIAL IN
LINE 2
XV-DV9.book 81 ページ ２００４年２月２０日 金曜日 午前１１時４２分