Filter
Top Products
Additional information
12
87
En
Error Messages
No sound from the
wireless speaker.
• If you selected
W.Stereo
, the volume on the wireless speaker may be
turned down too low.
Horizontal stripe noise
interference on a TV set
near the transmitter.
• If there a piece of A/V equipment with an antenna near the transmitter,
move the transmitter away from the antenna input terminal of the AV
equipment.
The
POWER
indicator
goes out when the switch
is on or the system is in
operation.
• It is likely that the system is malfunctioning. Ask your nearest Pioneer
authorized service center or your dealer to carry out repair work.
Problem
Remedy
Message Description
Child Lock
• This message appears when the front panel buttons are pressed when
the child lock feature is active. See
Child lock setting
on page 74 for more
on switching on/off the child lock.
Rec Mode On
• Blinks rapidly for 2 seconds when an operation is prohibited because
the Recording Mode is on (see
Recording mode
on page 82).
Phones In
• Blinks rapidly for 2 seconds when an operation is prohibited because
headphones are connected.
96k Stereo
• Blinks rapidly for 2 seconds when an operation is prohibited because
the source is digital 88.2 or 96kHz PCM.
No Surr. SP
• Blinks rapidly for 2 seconds when an operation is prohibited because
there is no surround speaker output.
Normal
/
Wide
/
Left Side
/
Right Side
/
W. Stereo
• Blinks rapidly for 2 seconds when an operation is prohibited due to the
wireless speaker setting.
Muting
• Blinks rapidly for 2 seconds when an operation is prohibited because
the sound is muted (press the
MUTE
button to turn the sound on).
Exit
• Appears briefly when a menu is automatically exited after a set period of
inactivity.
SR+ Error
• Appears when there is a communication problem between the unit and
the plasma display. Check all connections and retry.
XV-DV9.book 87 ページ ２００４年２月２０日 金曜日 午前１１時４２分