Filter
Top Products
DVD-V5000 DVD Player
RS-232 Command Protocol
5.32 Display Control
Function : Character display is turned ON / OFF
Format : Integer DS
Explanation : The player rewrites the Display Control Register (argument) then
returns the completed status message. The default register value is 0
(display switched OFF). Arguments can display User's Area Characters, Title
Number, Time Code, Chapter Number and Audio Output information.
Display changes are restricted when Argument 1 is set through the serial
connection. The remote control is blocked from changing the on-screen
display.
NOTE: The displayed Frame number attempts to auto-correct to the actual
Frame number, however, Frames continue to advance during playback.
Argument Function
0 OFF
1 Displays user’s area that is set by Register A
2 When playing DVD:
Title, Number of total Title, play time
Remain time and total time based on each Title
Audio, Subtitle, Angle
When playing CD/VCD:
Track, Number of total Track, play time
Remain time and total time based on each Title
3 When playing DVD:
Chapter, Number of total Chapter, play time
Remain time and total time based on each Chapter
Transfer rate
When playing CD/VCD:
Play time, remain time and total time based on Disc
Execution :
String Status Return DVD player
1DS<CR>
R<CR>
Display Switch = OFF to
Display Switch = ON
Display condition is set on
Register A
3DS<CR> R<CR> Display condition = 3
DS<CR> R<CR> Display Switch = OFF
- 32