Filter
Top Products
Appendix D Plasmon D875 - D2175 User Manual
Page 76 Document Revision E
4 Terminated SCSI task
or completion status not
started during a store
tray retry
61 1 Lift Position fail Destination encoder
count out of boundaries
Bad Lift
motor/
encoder
Replace lift motor
2 Position lift destination
not reached (time-out)
3 Destination lift position
is invalid
4 Position retry aborted
63 1 Lift blocked VP sensor blocked, last
col Blocked is set
Tray out of
slot, Bad Vp
Reseat tray in slot, replace
VP
2 Lift is not in column of a
blocked VP sensor dur-
ing initialization
Bad Vp sen-
sor, tray out
slot
3 VP or Tray sensor
blocked after storing
media, during initializa-
tion.
Obstruction
in slot
4 Blocked VP sensor not
in the column clear
attempt being tried
5 VP or Tray sensor
blocked after store or
load, during clear
attempt.
Obstruction
in slot or
drive
6 VP or Tray sensor
blocked after store
operation (move from
lift)
Obstruction
in slot
7 VP or Tray sensor
blocked trying to return
a tray to its last known
location.
Obstruction
in slot, align-
ment
69 1 Pivot align fail Too much gear back-
lash / gear is loose dur-
ing home pivot attempt
Pivot motor
mounting
Realign or replace pivot
motor
Error
Code
(hex)
Sub-
code
Error
Description
Subcode
Description
Compo-
nent
Corrective Action