Filter
Top Products
BALANCE
1 Move to “BALANCE” by pressing CH (…/†) buttons.
2 Press VOL (œ/√) buttons to adjust audio output between
left and right speakers.
SPATIAL
This function is to work virtual surround sound effect.
1 Move to “SPATIAL” by pressing CH (…/†) buttons.
2 Press VOL (œ/√) buttons to select.
SOUND SOURCE
Select sound output between Main Picture Sound and PIP
Picture sound.
* This item is available while PIP picture exists. (Refer to page
26 for PIP mode)
1 Move to “SOUND SOURCE” by pressing CH (…/†) buttons.
2 Press VOL (œ/√) buttons to select.
PRESET
This function is to select the sound appropriate to your TV
program.
1 Move to “PRESET” by pressing CH (…/†) buttons.
2 Press VOL (œ/√) buttons to select among USER, NEWS,
MOVIE and MUSIC.
MENU adjustment
21
MENU adjustment
20
3
SOUND ADJUSTMENT
Press MENU ( ) button to display the MENU screen.
Select “SOUND” by pressing VOL (œ/√) buttons, then press CH
down (†) button to enter into the items below.
MTS
The System has a feature that allows a sound reception
different from the main audio for programs. This feature is
called Multi-channel Television Sound (MTS). The System with
MTS can receive mono sound, stereo sound and Secondary
Audio Programs (SAP). The SAP feature allows a TV station to
broadcast other information, which could be audio in another
language or something completely different like weather
information. You can enjoy hi-fi stereo sound or SAP
broadcasts in the available location. If stereo sound is difficult
to hear, select MONO.
1 Move to “MTS” by pressing CH (…/†) buttons.
2 Press VOL (œ/√) buttons to select among STEREO, SAP or
MONO.
• STEREO broadcasts : Watch programs like live sports, shows
and concerts in dynamic stereo sound.
• SAP broadcasts : Listen to the second language,
supplementary commentary and other information. (SAP is
mono sound.)
• MONO : Obtain clearer sound by switching the mode into
fixed mono-sound manually.
* You can select one directly with MTS button on the remote
controller.
TREBLE
To stress high frequency sound
1 Move to “TREBLE” by pressing CH (…/†) buttons.
2 Press VOL (œ/√) buttons to adjust the treble weaker or
stronger.
BASS
1 Move to “BASS” by pressing CH (…/†) buttons.
2 Press VOL (œ/√) buttons to adjust the bass weaker or
stronger.
!!
• MTS item can be activated only when
TV mode is selected.
• When “MONO” mode is selected, the
sound remains mono even if the TV set
receives a stereo broadcast. You must
switch the mode to “STEREO” if you
want to hear stereo sound.
• If you get some strange sound on
stereo mode in poor signal area or non-
dual signal service area, make sure to
select MONO mode.
← For weaker treble For stronger treble
←
← For weaker bass For stronger bass
←
← Decrease right speaker
sound
Decrease left speaker
sound
←
!!
• Bilingual (dual language) signal
- This contains the secondary language
signal in addition to the primary one.
- There are the primary and secondary
languages and stereo modes in
bilingual signal.
• STEREO or SAP mode is available only
when broadcasting signal contains the
data.
polaroid LCD1550/1750(NT) 03.6.19 9:58 AM ˘ ` 20 mac001 1200DPI 90LPI