Filter
Top Products
16
Chapter 2 Installing the LCD TV
Use a supplied antenna cable to connect the TV signal to the LCD TV’s TV CABLE terminal.
VHF/UHF IN
Connect the AC power cord at the back of the TV and connect the power cord to wall outlet.
Press the POWER button on your remote to turn on your LCD TV.
a. After connecting an aerial to your LCD TV and connecting the mains cable to the
TV and 230VAC mains socket, turn the POWER SWITCH of rear TV on, a red light
will show on the front centre panel of the TV.
b. Press the POWER button, the red light will change to green and the First Time
Installation screen will show:
1. Make sure an aerial is fi tted then press OK button on the remote to start
the Auto Programme Scan (APS).
2. In a short while you will see the TV programmes briefl y as each channel is
received and stored in the memory. When APS is completed BBC1 will show,
press CH+/- buttons to view the other channels stored.
c. To power off press the POWER button, the green light will change to red.
Press the SOURCE button and choose TV or DTV mode then press OK to select.
4
3
2
1