Filter
Top Products
Configuration Guide
PN: 1725-36060-001_D.doc
12
Configuration File (For Reference Only)
The following configuration file was used during VIEW Certification
testing. The configuration below includes all configuration attributes,
including defaults. Use the command
show configuration all for
this detailed version. To only see non-default configuration values,
use the command
show configuration.
Note: All of the lines below are commands, except for those preceded
by the # symbol, which denotes a comment.
# General Configuration
set ip dns domain trpz.com
set ip dns enable
set log console enable severity error
set log session disable severity info
set log buffer enable severity error
set log trace enable severity debug mbytes 1
set web-aaa enable
set dot1x timeout supplicant 30
set dot1x timeout auth-server 30
set dot1x quiet-period 0
set dot1x reauth-max 2
set dot1x tx-period 5
set dot1x reauth-period 3600
set dot1x max-req 2
set dot1x key-tx enable
set dot1x reauth enable
set dot1x authcontrol enable
set dot1x wep-key-period 1800
set dot1x wep-rekey enable
set dot1x bonded-period 0
set prompt
set system ip-address x.x.x.x
set system countrycode US
set auto-config disable
# Security Profile
set service-profile VoWLAN-WPA ssid-name <SSID name>
set service-profile VoWLAN-WPA shared-key-auth disable
set service-profile VoWLAN-WPA wep active-unicast-index
1