Filter
Top Products
46
Timer Recording with VIDEO Plus+ System
This system makes programming timer recordings very
simple. Most TV guides publish the PlusCode program-
ming numbers with their program details.If you want to
make a timer recording of a program, you just input the
corresponding PlusCode programming number. The
date, start, stop and channel settings are made auto-
matically. All you have to do is tell the recorder the
recording mode and quality, and whether it’s a once-
only recording, or a regular recording.
Up to 8 timer programs can be stored in the recorder.
11
Press VIDEO+.
The VIDEO Plus+ menu will appear.
Press VIDEO+ again to exit the menu.
22
Use the number buttons then press ENTER to
enter the PlusCode programming number.
• If you make a mistake before pressing ENTER,
press CLEAR repeatedly to delete password
numbers one by one then correct it.
To check the programming, the Timer Record menu
will appear.
You can change the settings as required (Mode,
PDC, etc.)
33
Follow steps 2-5 as shown on previous page
(Timer Recording).
Checking Timer Recording Details
Programming can be checked whenever the Recorder
is turned on. Press TIMER twice.
• Use v / V to select a timer recording.
• Press ENTER to edit the selected program.
Timer Record menu appears.
• Press CLEAR to delete the selected program
from the Timer Record List.
Canceling a Timer Recording
You can clear a timer setting anytime before the record-
ing actually starts.
• Use v / V to select a program you want to erase on
the Timer Recorder List. If you want to erase the
program, press CLEAR.
Stopping a Timer Recording in Progress
After a timer recording has started, you can still cancel
the program.
• Press STANDBY-ON.
Timer Recording Troubleshooting
Even though the timer is set, the recorder will not
record when:
• There is no disc (or tape) loaded.
• A non-recordable disc (or tape) is loaded.
• Disc Protect is set to ON in the Setup menu
(see page 30).
• Power is turned on. (Please ensure that the set is in
Standby mode for Timer recording to activate.)
• There are already 49 titles recorded on the disc.
You cannot enter a timer program when:
• A recording is already underway.
• The time you’re trying to set has already passed.
• There are already 8 timer programs set.
If two or more timer programs overlap:
• The earlier program takes priority.
• When the earlier program finishes, the later program
starts.
• If two programs are set to start at exactly the same
time, the program entered first takes priority.
If the disc is damaged, the recording may not complete
successfully. In this case even though the Check field
shows “Rec. OK”, it may not be.
Media Start Time LengthDatePR Mode Check
Timer Record List
CloseDelete
CLEAR
16/05 Sun 11 10:12 30min SP
PDC
ON Rec. OK
Timer RecEdit
TIMER
OK
TIMEROK OK
Media PR Date Start Time End Time Mode
Timer Record
Timer Rec List Close
198 min Free
9DVD 16/05 Sun 10:07
11:00 SP
SP
C07
PDC
ON
VIDEO Plus+
OK Close
Number
0-9 Input
Delete
CLEAROK