Filter
Top Products
RTM-L
Page 10 Installation Instructions
3. Lower the universal bracket bar and display into the
cradle (as to the left).
NOTE
: The circular portion of the universal bracket bar
must rest inside the nylon sleeve. If seated
improperly, the operation of the RTM-L will be
hindered and the nylon sleeve will become
damaged.
4. Insert an M6 knurl knob into the knurl knob mounting
point and tighten.
5. Tighten the two (2) Phillips head screws (located
on the side of the mounting block) once the final
position is attained.
Locking Screws
Knurl Knob Mounting Points (a knurl knob may be
placed in either mounting hole)
Nylon
Sleeve