Filter
Top Products
PSD-BW/L
Installation Instructions Page - 6 -
PSD-SPA Installation (Figure 3)
NOTE: Use of the PSD-SPA will depend on the mount that is used. All PSM/CTM Series mounts require using the PSD-SPA.
The Revolution Series, USA and UFA Mounts, however, do not require the use of the PSD-SPA.
1. Slide the PSD-SPA over and down the support tubes.
2. Once the desired height has been determined, tighten the four (4) M8 x 10mm set screws, using the 5/32” Allen wrench (supplied)
to secure the PSD-SPA (Figure 3).
Figure 3
PSD-BW/L Nesting Cart Storage (Figure 4)
The PSD-BW/L is designed to maximize storage space. When storing multiple carts, slide the Nesting Carts together as close as
possible.
NOTE
: Please adhere to any WARNING statements that will apply to the different mounting configurations the PSD-BW/L
Nesting Cart will be used with.
Figure 4
5/32” Allen Wrench
Support Tubes
Support Tubes
PSD-SPA