Filter
Top Products
Page 2 Installation Instructions
Table of Contents
PREMIER MOUNTS DOES NOT WARRANT AGAINST DAMAGE CAUSED BY THE USE OF ANY PREMIER MOUNTS PRODUCT
FOR PURPOSES OTHER THAN THOSE FOR WHICH IT WAS DESIGNED OR DAMAGE CAUSED BY UNAUTHORIZED ATTACH-
MENTS OR MODIFICATIONS, AND IS NOT RESPONSIBLE FOR ANY DAMAGES, CLAIMS, DEMANDS, SUITS, ACTIONS OR
CAUSES OF ACTION OF WHATEVER KIND RESULTING FROM, ARISING OUT OF OR IN ANY MANNER RELATING TO ANY
SUCH USE, ATTACHMENTS OR MODIFICATIONS.
THE WALL STRUCTURE MUST BE CAPABLE OF SUPPORTING 2000LBS. IF NOT, THE WALL STRUCTURE MUST BE
REINFORCED. PROPER INSTALLATION PROCEDURE BY A QUALIFIED SERVICE TECHNICIAN, AS OUTLINED IN THE
INSTALLATION INSTRUCTIONS, MUST BE ADHERED TO. FAILURE TO DO SO COULD RESULT IN SERIOUS PERSONAL
INJURY, OR EVEN DEATH.
SAFETY MEASURES MUST BE PRACTICED AT ALL TIMES DURING THE INSTALLATION OF THIS PRODUCT. USE PROPER
SAFETY GEAR AND TOOLS FOR THE INSTALLATION PROCEDURE TO PREVENT PERSONAL INJURY.
Warning Statements
Indicates that the power plug is to be disconnected
from the power outlet.
Safety precautions must be taken at all times.
Warning and Caution statements.
Do not install next to any high heat sources. Failure to do so may result in damage to the flat panel display and could increase the risk of fire.
In the interest of safety, it is recommended that two to three people, with the aid of an appropriate assisted lifting device, perform this
installation. Injury and/or damage can result from dropping or mishandling the flat panel display.
Contact Premier Mounts Technical Support with any
questions - (800) 368-9700.
Warning Statements 2
Parts List 3
Recommended Installation Tools 3
Features 4
Installation Instructions 4
Technical Specifications 8
Warranty 8
PRIOR TO THE INSTALLATION OF THIS PRODUCT, THE INSTALLATION INSTRUCTIONS SHOULD BE READ AND
COMPLETELY UNDERSTOOD. THE INSTALLATION INSTRUCTIONS MUST BE READ TO PREVENT PERSONAL INJURY AND
PROPERTY DAMAGE. KEEP THESE INSTALLATION INSTRUCTIONS IN AN EASILY ACCESSIBLE LOCATION FOR FUTURE
REFERENCE.
It is recommended that a maximum of 5/8” thick plaster board be used, along with 5/16” lag bolts and flat washers, when mounting to wooden
studs.
TWM-103
THIS MOUNT IS NOT RECOMMENDED FOR USE
WITH STEEL STUD WALL STRUCTURES THAT
ARE LESS THAN 10 GAUGE IN THICKNESS ON
THE PROPOSED INSTALLATION WALL.
INSTALL THE DISPLAY ACCORDING TO THE INSTRUCTIONS PROVIDED BY THE DISPLAY MANUFACTURER.
PERFORM ALL STRUCTURAL REINFORCEMENTS BEFORE ATTACHING THE DISPLAY TO THE WALL. USE
THE APPROPRIATE LIFTING DEVICE WHEN LIFTING THE DISPLAY INTO PLACE.