Filter
Top Products
Loading a Disc
When all connections have completed,
you can load a disc as follow:
1. Turn the ignition on to the accessory
position.
2. Press the PWR/ILL button on the front
panel or POWER/ILL button on the
remote control to turn on the unit.
3. Press OPEN button on the front panel
to fold down the panel.
4. Insert the disc with printed side facing
up into the disc slot.
5. The player will start playback
automatically.
Ejecting a Disc
When the front panel is folded down,
press
button on the back of the front
panel to eject the disc.
LOADING/EJECTING A DISC
Preparing the Remote Control
Inserting the Batteries
1. Open the battery compartment cover.
2. Insert the new battery. Make sure
that the positive and negative
terminals of the battery are oriented
as indicated.
3. Close the cover.
Battery: a button cell lithium battery
(CR2025 3V)
Using the Remote Control
Point the remote control towards the
player front face remote sensor IR
(remote control signal receiver).
Operation angle: About ± 30 degree in
each the direction of the front of the
remote sensor.
REMOTE CONTROL
14
Open button