Filter
Top Products
RADIO OPERATION
SWITCHING TO RADIO MODE
Press MODE on the front panel or MODE
on the remote control to select radio
mode, the radio mode appears in the
display together with the memory band
and frequency.
SELECTING THE FREQUENCY BAND
During radio mode, shortly press MENU
(BAND) button on the front panel or BND
(MENU) button on the remote control to
select the desired band. The reception
band will change in the following order:
SELECTING STATION
Press
/ buttons on the remote
control or / buttons on the front
panel shortly to activate automatic seek
function. Press and hold
/ buttons
for several seconds until “MANUAL”
appears on the display, the manual tuning
mode is selected.
Then shortly press
/ buttons to
increase or decrease frequency by one
step of channel spacing, hold the buttons
longer for fast tuning. If both buttons have
not been pressed for several seconds, it
will return to seek tuning mode and
“AUTO” appears on the display.
Shortly press
/ buttons on the remote
control or
/ buttons on the front panel
to increase or decrease frequency by one
step of channel spacing. The frequency
is updated correspondingly on display.
LOCAL/DISTANT
Press and hold ST/LOC/TITLE button on
the front panel or ST/TITLE button on the
remote control for several seconds to
select between local and distant stations.
Local setting for reception of strong
station, and a distant setting for reception
of weaker stations. This function is effect
during AUTO SEEK operation.
AUTOMATIC MEMORY STORING &
PROGRAM SCANNING
- Automatic memory storing
Press and hold AMS button on the front
16
OPERATION
panel or on the remote control for
several seconds, the radio searches
from the FM1 the initial frequency and
checks the signal strength until one
cycle search is finished. And then 6
strongest stations are stored into the
corresponding preset number button.
- Program scanning
Press AMS button shortly to scan preset
station.
STATION STORING
Press any one of the preset buttons (1 to
6) on the front panel to select a station,
which had been stored inthe memory.
Press this button for several seconds,
current station is stored into the number
button.
MONO/STEREO
Press ST/LOC/TITLE button on the front
panel or ST/TITLE button on the remote
control shortly to select mono or stereo
mode. You can sometimes improve
reception of distant stations by selecting
mono operation.
SCAN
Press MUT/ENT button on the front panel
shortly to set function to scan mode,
which scanning to higher frequency station
with receivable signal and keep on each
station for several seconds.
FM1 FM2 FM3 AM1 AM2