Radio Shack 113 (16-550) VCR User Manual


 
13
CAMCORDER CONNECTIONS
Your Model 62 VCR has jacks on its front panel that let you easily connect a camcorder or other
video source. You can also connect a camcorder to the
AUDIO IN
and
VIDEO IN
jacks on the back
panel of your Model 112/113 VCR.
You need a stereo A/V cable (not supplied) with plugs that fit the VCR’s jacks and the camcorder’s
jacks for this connection.
1. Insert the plugs at one end of the cable into the
AV 2 AUDIO
and
VIDEO IN
jacks on the Model
62’s front panel.
2. Insert the plugs at the other end of the cable into the AUDIO/VIDEO OUT jacks on your cam-
corder or other video source. Be sure to connect VIDEO to VIDEO and AUDIO to AUDIO (use
the plug’s color codes as a guide).
CONNECTING POWER
To power the VCR, plug its power cord into a standard AC outlet. --:-- appears on the display.
Note:
The VCR starts to search for a channel that
has an Extended Data Service (EDS) signal
(see “Turning On Auto Clock Set” on Page 17)
when:
You plug in the VCR for the first time.
You unplug the VCR and reconnect it (within 24 hours) or after a power failure (of less than 24
hours).
You reset the VCR’s memory (see “Resetting the VCR’s Memory” on Page 18).
REWIND
STOP
EJECT
PLAY
FAST-F
CHANNEL
RECORD/TIME
POWER
TV/VCR
VIDEO IN L – AUDIO IN – R
AV 2
(Model 62 shown)
16-549.fm Page 13 Tuesday, July 20, 1999 5:04 PM