Radio Shack 113 (16-550) VCR User Manual


 
8
BEFORE YOU BEGIN
SUPPLIED ACCESSORIES
Be sure to remove these items before you
store the packing material.
Remote control
75-ohm coaxial cable
Depending upon your audio/video system set-
up, you might need additional cables or adapt-
ers (available at your local RadioShack store).
Read “Installation” on Page 9 to determine
your specific needs.
MOISTURE CONDENSATION
Condensation inside the VCR can cause tape
jams or video head damage. When you move
the VCR from a cold area to a warmer one, let
it sit for about 2 hours before you plug it in and
begin operation. This allows any moisture in-
side the VCR to completely evaporate.
USING THIS MANUAL
This manual has these major sections:
Installation
— shows you how to connect the
VCR to your audio/video system.
VCR Setup
— includes procedures for prepar-
ing and using the remote control, setting the
on-screen programming language, setting the
channels your VCR can tune, and setting the
clock.
Operation
— explains how to watch TV using
the TV’s or VCR’s tuner, and load and play a
video tape.
Special Functions
— describes what appears
on the VCR’s display and the TV screen, and
how to fast-forward and rewind a tape, use the
VCR’s special playback, display, and search
features, set the tracking manually, improve
playback of worn or damaged video tapes, and
use index search.
Recordin
g
— describes the different recording
methods.
Additional Information
— includes a trouble-
shooting section, care and maintenance proce-
dures, and the VCR’s specifications.
We recommend you thoroughly read at least
“Installation” on Page 9 and “VCR Setup” on
Page 14, to be sure you correctly install and
set up your VCR.
When reading through this manual, keep the
following in mind:
Some buttons on the remote control also
appear on the VCR. You can use these
buttons to operate the same functions.
Other procedures use only the VCR’s but-
tons, or only the remote control’s.
Some buttons are labeled differently on the
VCR and on the remote control. Since you
use the remote control most often to
change settings and functions, this manual
refers only to the remote control’s labels.
Unless otherwise noted, however, you can
use either the remote control’s or the
VCR’s buttons at any time.
All buttons, switches, and jacks on the
VCR and all buttons on the remote control
are shown in
BOLD UPPERCASE
letters in
this manual.
Information that appears on the TV screen
is shown in this typeface:
PLAY
Information that appears on the VCR’s dis-
play is shown in this typeface: VCR
The VCR displays menus and options on
the TV you connect it to, and other infor-
mation (such as tape motion indicators, the
real-time counter, etc.) on its display.
If a menu disappears before you finish
entering information, simply locate the step
where you first pressed
MENU
on the
remote control, then repeat that step and
all steps that follow.
16-549.fm Page 8 Tuesday, July 20, 1999 5:04 PM