Radio Shack 113 (16-550) VCR User Manual


 
17
When the information is correct and the
time reaches the minute you set in Step 7,
press
MENU
twice. The currently set time
appears and the clock starts running.
Note:
Seconds begin counting from 00
when you press
MENU
twice.
Turning On Auto Clock Set
If you turned off the auto clock set feature and
manually set the VCR’s clock, then find that
EDS is available in your area, you can turn the
auto clock set feature back on. This ensures
that the VCR sets itself to the correct time after
a power failure of less than 24 hours.
Follow these steps to turn on auto clock set.
1. Press
MENU
to display the main menu.
2. Repeatedly press
PLAY
or
STOP
to high-
light
SET
CLOCK
, then press
FAST-F
.
3. Repeatedly press
PLAY
or
STOP
to high-
light
AUTO
SET
, then press
FAST-F
.
4. Press
CH
s
. The VCR searches for an EDS
signal and, if it finds one, automatically
sets its clock to the correct time. If the VCR
does not find an EDS signal, follow the
steps under “Manually Setting the Clock”
on Page 16.
Adding/Erasing Channels
We recommend you check the channels the
VCR automatically stored. It might have stored
distant, weak channels that you normally would
not watch, or it might have missed channels
you want to store.
If the tuner stores a channel that you do not
want, repeatedly press (or press and hold)
CH
s or
CH
t to tune to that channel, then press
ADD/DLT
.
CHANNEL
nn
DELETED
appears,
and the unwanted channel is erased from the
tuner’s memory.
If you want to program a weak channel that au-
tomatic programming missed, enter the desired
channel number using the remote control’s
number buttons. Then press
ADD/DLT
.
CHAN-
NEL
nn
ADDED
appears, and the channel is
added to memory.
Reprogramming Tuner Memory
You might want to reprogram the VCR’s tuner
memory if you move or change from an anten-
na connection to a cable TV connection.
Note:
You can also quickly erase all settings,
including the time, local channels, and pro-
grammed events, then reprogram the tuner’s
memory. See “Resetting the VCR’s Memory”
on Page 18.
Follow these steps to reprogram the tuner.
1. Press
MENU
to display the main menu.
Note:
To exit the programming mode dur-
ing Steps 2–4, press
MENU
again.
Y
Y
K
ET
C
HANNEL
08
DE
L
E
T
ED
C
HANNEL
08
ADDED
16-549.fm Page 17 Tuesday, July 20, 1999 5:04 PM