Filter
Top Products
Need help? Call
1-800-950-7044
12
OPERATION
1. Press the device key for the device you want
to operate, then point the 6 in 1 at the device
and press
PWR
(or
CH
s
for some cable con-
verters) to turn the device on.
2. Repeat Step 1 for all other devices you want
to operate.
3. Point the 6 in 1 IR/RF Remote Control
toward the device you want to control, then
press the appropriate device key and the
desired command keys.
Note:
The command keys on the 6 in 1 IR/
RF Remote Control work the same as the
keys on the original remote control; however,
the labeling might differ slightly.
4. To turn off the last device you selected, press
PWR
. To turn off other devices, press the
device key for the device you wish to turn off,
then press
PWR
.
USING THE 6 IN 1’S RF
COMMAND CONSOLE
To operate your IR remote-controlled devices
from anywhere in your house, make sure the front
of the RF command console points toward the de-
vice(s) that you want to control, and fully extend
the console’s antenna. Press the appropriate de-
vice key on your 6 in 1, then the desired function
keys.
CHANNEL SCAN
Channel Scan lets you scan through all available
channels on your TV, VCR, or cable converter,
stopping at each for about 3 seconds.
1. Press the device key (
TV
,
VCR
, or
CBL
).
15-1925.fm Page 12 Monday, July 19, 1999 12:59 PM