Filter
Top Products
Need help? Call
1-800-950-7044
14
Note:
If your device requires the use of an
ENTER key to change channels, you must
press
ENTER
instead of
SET UP
after each
channel you enter into the 6 in 1 IR/RF
Remote Control’s memory.
6. Repeat Steps 4–5 to enter the channels you
want to include in your favorite channel list.
After you have entered the last channel num-
ber, hold down
SET UP
until the red light
blinks twice.
Using Favorite Channel Scan
To scan through your favorite channels, press
SCAN
and keep the 6 in 1 IR/RF Remote Control
aimed at your device. The remote control scans
through your selected channels.
The 6 in 1 IR/RF Remote Control stops scanning
after it reaches the last channel in your Favorite
Channel Scan list. To stop scanning earlier, sim-
ply press any key on the remote control.
Clearing Favorite Channel Scan
To clear the favorite channel feature of all entries:
1. Hold down
SET UP
until the red indicator light
blinks twice.
2. Press
9
–
9
–
6
. The red light again blinks
twice.
3. Press and release
SET UP
, then hold down
SET UP
until the red light blinks twice again.
15-1925.fm Page 14 Monday, July 19, 1999 12:59 PM