16
2. To manually search the band, press
HOLD
after the scanner starts auto-
matically searching the frequen-
cies. The scanner displays
H
(hold),
▲ or ▼, and a frequency within the
band you selected.
3. Repeatedly press ▲ to step from the
lower to the upper range, or ▼ to
step from the upper to the lower
range.
Hold down ▲ or ▼ for about 1 sec-
ond or press
HOLD
to return to auto-
matic search.
4. When the scanner finds an active
frequency, you can do any of the fol-
lowing:
• save the frequency into the cur-
rent monitor memory by pressing
MONITOR
.
• continue searching by pressing ▲
or ▼.
• stop searching and listen to the
frequency by pressing
HOLD
.
H
(hold) appears.
Note:
You can change the direction of a
manual search by pressing ▲ or ▼
once.
Direct Search
Using direct search, you can enter a fre-
quency, then search for transmissions
above or below that frequency within all
of the frequency bands.
1. Press
MANUAL
.
2. Use the number keys to enter the
frequency where you want to start
the search. Press • to enter the dec-
imal point.
3. Press ▲ or ▼ to search up or down
from the selected frequency.
d
(direct) and ▲ or ▼ appear, and the
next available monitor memory
number flashes.
Note:
If you entered an invalid fre-
quency in Step 2, the scanner dis-
plays
Error
. Press
CLEAR
, then
repeat Steps 2 and 3.
4. When the scanner finds an active
frequency, you can do any of the fol-
lowing:
• save the frequency into the cur-
rent monitor memory by pressing
MONITOR
.
• continue searching or change the
search direction by pressing ▲ or
▼.
• stop searching and listen to the
frequency by pressing
HOLD
.
h
(hold) appears.
To manually step through frequencies
one at a time after you stop a search, re-
peatedly press ▲ or ▼. To continue
searching, either press
HOLD
or hold
down ▲ or ▼ for about 1 second.
LISTENING TO MONITOR
MEMORIES
After you store frequencies into the
scanner’s monitor memories, you can
listen to them by pressing
MANUAL
,
MONITOR
, then the number for the de-
sired monitor memory.
20-422.fm Page 16 Friday, January 7, 2000 12:54 PM