Radio Shack 20-422 TV Antenna User Manual


 
8
CONNECTING AN
EXTERNAL SPEAKER
You can connect an optional external
speaker with a
1
/
8
-inch (3.5-mm) plug to
the scanner. Use an 8-ohm external
speaker that can handle at least 2.5
watts of power. Your local RadioShack
store sells scanner accessories, includ-
ing external speakers.
Insert the speaker’s plug into the
EXT.
SP.
jack on the back of the scanner.
Note:
Plugging in an external speaker
disconnects the scanner’s internal
speaker.
CONNECTING AN
EARPHONE OR
HEADPHONES
You can connect an optional earphone
or pair of monaural headphones with a
1
/
8
-
inch (3.5-mm) plug to the scanner. Your
local RadioShack store sells a complete
line of earphones and headphones.
Insert the earphone’s or headphones’
plug into the
EXT. SP.
jack on the back of
the scanner.
Note:
Plugging in an earphone or head-
phones disconnects the scanner’s inter-
nal speaker.
Listening Safely
To protect your hearing, follow these
guidelines when you use an earphone/
headphones.
Set the volume to the lowest setting
before you begin listening. After you
begin listening, adjust the volume to
a comfortable level.
Do not listen at extremely high vol-
ume levels. Extended high-volume
listening can lead to permanent
hearing loss.
• Once you set the volume, do not
increase it. Over time, your ears
adapt to the volume level, so a vol-
ume level that does not cause dis-
comfort might still damage your
hearing.
20-422.fm Page 8 Friday, January 7, 2000 12:54 PM